Knowledgebase
How to Set your local Time Zone clock offset for the SPA2102
Posted by George Chu on 20 February 2014 05:23 PM
Connect and Login to the SPA2102 Web Based Configuration Interface
Connect your PC to the SPA2102 using its LAN-side gateway:
  1. Connect your PC Ethernet LAN cable directly to the yellow Ethernet LAN port of the SPA2102.
  2. Connect to the SPA2102 web interface by entering its LAN gateway IP address into your Web Browser using the default address of 192.168.0.1
  3. By default, you will be viewing the SPA2102 "Status" page, in "Basic" view.  By default, there is no password required to connect and login to Basic view.

Navigate to the Voice and Regional tab page.  Scroll to the bottom of the page.
Set your local Time Zone offset, depending on where you live.

Click the Submit All Changes button to SAVE your custom settings.

***Select GMT -05:00 for Ontario Region***

 

(0 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
Help Desk Software by Kayako Resolve