Knowledgebase
ZHONE 6718 VDSL Modem Quick Setup: (FTTN25/10 or FTTN50/10)
Posted by George Chu on 25 June 2015 07:36 PM

ZHONE 6718 VDSL Modem Quick Setup: (FTTN25/10 or FTTN50/10) V6F038N.D24J

1) Open your web browser and go to 192.168.1.1

2) A login window will pop up and you will enter username "admin" and password "adminxxxxxx" (xxxxxx is the last 6 digits of the modem's serial number) and press ENTER

3) Click on "Advanced Setup"

4) Select “WAN Service” and click add and choose PTM (for VDSL). 

5)Choose PPPoE, for VDSL, set 802.1P Priority=1, 802.1Q VLAN ID=35, click next

5) Key in your PPPoE Username and password, tick Enable NAT

6) Scroll all the way down and click on "Next", "Next", "Next" and "Apply/Save"

7) Wireless SSID: Zhonexxxxxx (xxxxxx is the last 6 digits of the modem's serial number)

8) WIFI WPA-PSK:  xxxxxxxxxxxx (modem's MAC Address all in CAPITAL)

(3 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
Help Desk Software by Kayako Resolve